China wholesaler High Quality 80 Ton Low Bed Truck Trailer 2 Line 3 Axles with Automatic Ramp for Nigeria axle fix cost

Product Description

High Quality 80 Ton Low Bed Truck Trailer 2 line 3 axles with automatic ramp for Nigeria

 

Product Instructions

LUCKIN VEHICLE supply Hot Selling Axles Lowbed Semi Trailer Near You,which  is commonly used to carry heavy duty construction machines and special vehicles, such as excavators, bulldozers, loaders, pavers, cranes, mining machinery, forestry machinery, ect. We are professional and excellent manufacturer and supplier of all kinds of trailers and trucks in China.

With its low height loading surface and heavy capacity, LUCKIN VEHICLE lowbed semi trailer can help you on various of difficult transport solutions. Especially, we adopt high strength steels and optimal designs plans based on years of accumulated experience and force analysis to satisfy the high concentrated force, anti-bump and distortion resistance during its different loading situations.

China Lowbed Semi Trailer for sale is getting more and more popular in the market because of its durable quality and good reputations. And we have exported more than 1000 units various styles of lowboy semi-trailers all over the world.

 

Product Details

       

Product Parameters

  

terms

Low bed semi trailer 

Low bed semi trailer 

Loading Capacity

40-60 tons

60-80 tons

Axle

3 pieces, 13T FUWA/BPW axle

4 pieces, 13T FUWA/BPW axle

Tyre

12 pieces, 10.00R20

16 pieces, 11.00R20

Dimensions(LxWxH)

13000 -17000mm x 3000 x 1750mm

Tare weight

10 tons to 12 tons

Axle spacing

1310mm

Rims

8.5-20, 9.0-20

Suspension System

Leaf spring suspension / air suspension

Brake System

Dual line pneumatic brake system with WABCO emergency relay valve

Main Beam

Height 500mm Q345 carbon steel

Chassis

upper 20mm, lower 20mm. Mid web 12mm

Rear Loading Ramps

2 nos, 720 mm width, spring loaded & manually operated with safety chain

Kingpin

2′ or 3.5′ interchangeable,JOST brand

Landing Gear

28 Tons , Two speed manual operation

Electrical System

1.Voltage: 24v  2. Receptacle: 7 ways (7 wire harness) German standard

Lights and Reflectors

Rear light, rear reflector, turn indicative light, side reflector, fog lamp, number plate light

Painting

Shot blast to SA 2.5 Standard prior to application of primer, polyurethane top coat. Total DFT not less than 100μm;Any color will be available

Tool Box

One tool box with a set of standard trailer tools

Spare Tyre Carrier

One piece or 2 pieces

Our Advantages

1.Mature Welding ProcessLUCKIN VEHICLE adopts automatic submerged arc welding method to weld the main beam. The longitudinal beam is completed by automatic tracking submerged arc welding machine. All components are shot peening to improve paint adhesion and are painted prior to assembly, making the main beam stronger and more durable.

2. Reliable Materials: We adopts high strength steel material to manufacture the flatbed trailer, it can make the flatbed trailer have a higher loading capacity and a longer service life. Besides, all the main parts, used in our trailers, must be processed with advanced equipment and have good reputations in the market.

3. Mature Design and Manufacture: We would like to design the trailer according to our customers’ needs and special using conditions. Also, we would consider more than what them based on their final usage, and provide customers with reasonable suggestions when they are hesitating. 

4. Rich experience: More than 20 years of experiences in producing and exporting trailers and other goods, we have helped hundreds of customers in more than 35 countries in Africa and Southeast Asia.

5. Quality Assurance: We offer 2 years’ warranty for chassis frames of our trailers and spare parts support services, would also be responsible for the damage of parts during normal use.

6. Customized Service: We support customized designing and production according to customers’ different needs and different road situations to match your usage in local.
 

Company Introduction

 

Certificate

Transportation Packing

 

FAQ

1. Who are we?

Answer: LUCKIN VEHICLE is a group company; we have 3 trailer factories in ZheJiang and 1 trading company in HangZhou. We are focus on semi-trailers, trucks and parts.

2. Why choose us

Answer: 1) We have more than 20years experience in the trailer manufacturing. LUCKIN VEHICLE has got high reputations in China and oversea countries.
2) We have more than 20 engineers to design the kinds of trailers according to the detailed requirements and needs from customers.
3) We had exported thousands of trailers to Africa, Middle East, Asia, Australia, South America since 2005.

3.How long does it usually take to receive the goods?

Answer:It usually takes 30 to 40 days of receiving the deposit.

4.Payment and mode of transportation?

Answer:We accept both T/T and D/P .
Bulk, rolling, loading, container transportation, I will actively provide customers with cheaper transportation.

5. If Our Trailer Can Couple With Your Tractor Head ?

Answer:- 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman…
– If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing.

6.Can you satisfy my special requirement?

Answer:Definitely!We can customize trailers or trucks according to your requirements.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: 2 Year
Warranty: 2 Year
Type: Semi-Trailer
Load Capacity: 50T
Certification: ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949
Wheel Base: 7000-8000mm
Customization:
Available

|

Customized Request

axle

Can you provide insights into the maintenance of axle bearings for smooth operation?

Maintaining axle bearings is essential for ensuring smooth operation, longevity, and optimal performance of a vehicle’s axle system. Here are some insights into the maintenance of axle bearings:

1. Regular Inspection:

Perform regular visual inspections of the axle bearings to check for any signs of wear, damage, or leaks. Look for indications such as excessive play, unusual noises, vibration, or leakage of grease. Inspections should be carried out as per the manufacturer’s recommended intervals or during routine maintenance checks.

2. Lubrication:

Adequate lubrication is crucial for the smooth operation of axle bearings. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for greasing. Over-greasing or under-greasing can lead to bearing damage or failure. Ensure that the proper amount of grease is applied to the bearings, and use a high-quality grease that is compatible with the axle bearing specifications.

3. Seal Inspection and Replacement:

Check the condition of the axle bearing seals regularly. The seals help to keep contaminants out and retain the lubricating grease within the bearing. If the seals are damaged, worn, or show signs of leakage, they should be replaced promptly to prevent dirt, water, or debris from entering the bearing assembly and causing damage.

4. Proper Installation:

During axle bearing replacement or installation, it is crucial to follow proper procedures to ensure correct seating and alignment. Improper installation can lead to premature bearing failure and other issues. Refer to the manufacturer’s instructions or consult a professional mechanic to ensure proper installation techniques are followed.

5. Load Capacity and Alignment:

Ensure that the axle bearings are properly sized and rated to handle the load capacity of the vehicle and the specific application. Overloading the bearings can lead to excessive wear and premature failure. Additionally, proper wheel alignment is important to prevent uneven bearing wear. Regularly check and adjust the wheel alignment if necessary.

6. Environmental Considerations:

Take into account the operating conditions and environment in which the vehicle is used. Extreme temperatures, exposure to water, dirt, or corrosive substances can affect the performance of axle bearings. In such cases, additional preventive measures may be necessary, such as more frequent inspections, cleaning, and lubrication.

7. Professional Maintenance:

If you are unsure about performing maintenance on axle bearings yourself or if you encounter complex issues, it is recommended to seek assistance from a qualified mechanic or technician who has experience with axle systems. They can provide expert advice, perform necessary repairs or replacements, and ensure proper maintenance of the axle bearings.

By following these maintenance insights, you can help ensure the smooth operation, longevity, and reliability of axle bearings, contributing to the overall performance and safety of the vehicle.

axle

Where can I purchase high-quality replacement axles for my make and model of vehicle?

When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:

  1. Authorized Dealerships:
  2. Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.

  3. Independent Auto Parts Stores:
  4. Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.

  5. Online Retailers:
  6. Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.

  7. Specialty Performance Retailers:
  8. If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.

  9. Local Salvage Yards:
  10. Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.

  11. Vehicle Manufacturer’s Online Parts Store:
  12. Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.

When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.

axle

Can you explain the importance of axle alignment for vehicle stability and handling?

Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:

  1. Tire Wear and Longevity:
  2. Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.

  3. Optimal Traction:
  4. Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.

  5. Steering Response and Stability:
  6. Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.

  7. Reduced Rolling Resistance:
  8. Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.

  9. Vehicle Safety:
  10. Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.

To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.

It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.

China wholesaler High Quality 80 Ton Low Bed Truck Trailer 2 Line 3 Axles with Automatic Ramp for Nigeria   axle fix costChina wholesaler High Quality 80 Ton Low Bed Truck Trailer 2 Line 3 Axles with Automatic Ramp for Nigeria   axle fix cost
editor by CX 2024-04-04


Comments

Leave a Reply

Your email address will not be published. Required fields are marked *